They range from Single Row deep groove and self - aligning ball bearings.

The deep groove ball bearings are of the Conrad type, assembled without the aid of a filling slot. Deep uninterrupted raceways, though designed primarily for light and moderated radial loads, will tolerate thrust loads in either direction as well as combined radial and thrusts loads. The availability of bearings with shields, seals, grooves on outer rings make them ideally suited for a wide and varied range of applications.

The Self-aligning ball bearings are particularly suited to applications where housing alignment of shaft deflection pose difficult problems. The use of these bearings eliminates the need for expensive precision machining of housings.

These bearings offer maximum flexibility and optimum performance. Two basic types are produced–separable inner race and separable outer race, with variations such as N, NF, NU, NUS, NJ, NH, NUP, NK, etc.,

The design options give the engineer complete flexibility in selecting the right bearing for the right application. These bearings combine valuable performance with least installation cost.

The company has successfully designed and Manufactured a specialized bearings of bore sizes up to 160mm to be used in the defence & Railway applications.

These bearings are ideally suited to support heavy combinations of thrust and radial loads. Geometrically, the extension of the contact lines between the rollers and races meet at a common point on the bearing axis of rotation. This design provides a true rolling motion for supporting combined radial and thrust loads in one direction.

Taper Roller Bearings range from extra light, light and medium series.